Another Reason Why I Prefer To Do My Serious Long Distance Driving With Two High-End Radar Detectors

As many of you already know, I recently drove in a transcontinental rally (race) from Orlando, Florida to Beverly Hills, California.

While Roy and I often rotated radar detector combinations, when traveling at hyper speeds, my personal preference was to use both the Valentine One and the Beltronics STi Driver.

It’s been my experience that driving with both radar detectors provides you with the best of both worlds.

With the V1, you gets:

  • The very best laser detection available (in a windshield-mounted radar detector)
  • Ultra-high level of radar reception ability
  • Directional information of the source(s) of police radar/police laser
  • One of the very best signal ramps in the industry (for quickly determining the severity of the threat)

With the Bel STi Driver, you get:

  • Ultra-high level of radar reception ability
  • Display of actual transmitting frequency (particularly useful for rapidly identifying real Ka threats)
  • Auto-muting

With Both of Them in Operation, you get:

  • The best of both worlds
  • One other benefit (something that has now happened more than once) — a check and balance system on radar reception.

And this time it was the Beltronics STi Driver which exhibited the reception issue (the last time it was the Valentine One, which turned out to be in need of a tuning).

During one of our radar encounters, the Valentine alerted to what appeared to be an approaching Ka source out in front somewhere. The entire duration of the radar encounter may have been in excess of 50 seconds. In not one of those seconds did the Bel STI Driver alert to the presence of Ka-band–remaining silent the entire time of the radar encounter.

Based upon the findings of a particular radar/laser enthusiast group, my conclusion was that the band in question was likely that of the less popular 33.8Ghz.

Had it not been for my updated/tuned Valentine, I would have not been alerted to its use.

I expect to send my Beltronics STi Driver in for a check-up/tune-up just as I did my V1 when it too missed a bona-fide radar encounter.

I know my handling and care for each radar detector could be better (I tend to leave them up on the windshield during the hot summer sun when I park).

For me, driving with two different high-end radar detectors (which have demonstrated to be compatible together) provides me an additional level of confidence while “seriously” driving for extended distances.

I expect to share more of my experiences of this cross country rally including some of the techniques I used to keep my ticket accumulation to an absolute minimum.

Veil Guy


  1. Good stuff Bob keep up the good work

  2. Good stuff Bob keep up the good work

Leave a Reply

Your email address will not be published.